Three-term polynomial progressions in subsets of finite fields

We prove that the group of diffeomorphisms of the interval [0, 1] contains surface groups whose action on (0, 1) has no global fix point and such that only countably many points of the interval (0, 1) have non-trivial stabiliser.     

Application of ion-imprinted polymer synthesized by precipitation polymerization as an efficient and selective sorbent for separation and pre-concentration of chromium ions from some real samples

In this study, a new Cr(III)-imprinted polymer (Cr(III)-IIP) is prepared from CrCl₃·6H₂O, methacrylic acid functional monomer, ethyleneglycoldimethacrylate cross-linking agent, 2,2?-azobisisobutyronitrile radical initiator and 2,2-(azanediylbis (ethane-2,1-diyl))bis(isoindoline-1,3-dione) ligand. To obtain the maximum adsorption capacity, the optimum condition was studied through pH, type and concentration of eluent, IIP weight, sample volume as well as the adsorption and desorption times. The Cr(III) ion content was determined via flame atomic absorption spectrometer. In optimum conditions, the adsorption capacity of the IIP for Cr(III) was obtained to be 74.65 mg g^?1, using 50 mg of IIP and the initial pH solution of 3.0. Both the adsorption and desorption times for quantitative analyses of Cr(III) ions were 15 and 5 min; respectively. After elution of the adsorbed ions by 3 mL of 4 mol L^?1 HNO₃ aqueous solution, the established IIP-based SPE procedure provides a reasonable pre-concentration factor of 100. The IIP-based pre-concentration method provides a low detection limit of 1.7 µg L^?1 with good repeatability (RSD?=?3.22%). Reusability studies confirmed that synthesis IIP is reusable and recoverable up to six cycles. According to the selectivity experiments, it was concluded that the prepared sorbent possesses more affinity toward Cr(III) ions than other ions such as Al³⁺, Pb²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺, and Ni²⁺ ions. To evaluate the potential applicability of the proposed separation method, the pre-concentration and determination of trace amounts of Cr(III) were performed successfully in food samples with complex matrices, a bestial sample (i.e. cow liver) and an herbal product (i.e., broccoli) as real samples.     

On the output function in a Ginsburg’s machine

We give the form of the output function in Ginsburg’s machine in which the input and output dictionaries are abelian groups and the transition function is of a special form.     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

Optical vortices in the Ginzburg–Landau equation with cubic–quintic nonlinearity

In a dissipative system with cubic–quintic nonlinearity, the curious evolution of optical vortex beams characterized by different topological charges (TCs) is simulated numerically and presented their evolution profiles. We find that new vortices will be induced during propagation, and the behavior of vortices, as affected by the TC and the number of beads of the incident beam, as well as its size, is also discussed. Common rules associated with the initial conditions coming from various incident beams are developed to determine the number of induced vortices and the corresponding rotation direction. Attributed to the nonlinearity, during propagation we see the beams slowly expand to induce new vortices, which commonly appear in oppositely charged pairs, while the net topological charge of the vortex is conserved. Our results not only deepen the understanding of optical vortices, but also widen their potential applications.     

Optimal input design for hydrodynamic derivatives estimation of nonlinear dynamic model of AUV

Input design has a dominant role in developing the dynamic model of an autonomous underwater vehicle (AUV) through system identification. Optimal input design is the process of generating informative inputs that can be used to provide a good-quality dynamic model of AUV. In this paper, amplitude-modulated pseudo-random binary signal (APRBS) inputs are optimally designed in order to estimate the hydrodynamic derivatives of an AUV’s nonlinear dynamic model. The input controls are designed so as to minimize uncertainty in estimating hydrodynamic derivatives. The employed approach can design multiple inputs and apply constraints on an AUV system’s inputs and outputs. The genetic algorithm is utilized to solve the constraint optimization problem. The presented algorithm is used for designing the input signals of Hydrolab300 AUV, and the estimation obtained by these inputs is compared with that of zigzag maneuver. According to the results, the designed APRBS inputs improve the uncertainties that exist in estimating hydrodynamic derivatives better than zigzag inputs.     

Modeling of the mode dynamics generated by Madison Symmetric Torus machine utilizing a modified sine-Gordon equation

In this paper, a new dynamic model is presented for the experimental data generated by the Madison Symmetric Torus (MST) machine. The model is based on a modified sine-Gordon (SG) dynamic equation. The modified sine-Gordon equation model effectively captures the behavior of the slinky mode in reversed-field pinch experiments. In addition, this paper demonstrates how the derived model accurately describes the behavior of the localized magnetohydrodynamic mode (slinky mode) that appears in reversed-field pinch toroidal magnetic confinement systems. The modified SG equation model is solved analytically by using the perturbation method. The resulting model is fit to match a variety of experimental results in the MST reversed-field pinch experiment. The efficacy of the newly developed model in effectively representing the slinky mode is verified by comparing obtained analytical solution to experimentally measured data.